What are the advantages of hot process soap making?<\/h2>\n
The advantages of using the hot process soap-making method<\/b> are many. Here are a few:\u00a0<\/p>\n To make a soap by the hot process, you will need the following:<\/p>\n The the hot process soap-making technique<\/b> calls for a certain discipline and a well-established preparation plan. Here are the steps:\u00a0<\/p>\n To make soap by the hot process method, start by slowly pouring the caustic soda into the distilled water<\/b>. Stir gently in a heat-resistant container.\u00a0<\/p>\n This reaction gives off heat and fumes; make sure you work in a well-ventilated place<\/b> and wear protective equipment<\/b> (gloves, face protection and so on).<\/p>\n Melt the oils <\/b>and natural butter <\/b>over low heat until it reaches a temperature of around 80 \u00b0C. Use the oil of your choice. The choice will depend mainly on what you need. You can therefore use avocado oil, coconut oil and others<\/b><\/p>\n Slowly pour the lye solution<\/b> into the melted oils while stirring. Make sure your hands, face and arms are well protected. The mixing should be done when both mixtures are at similar temperatures, between 80 \u00b0C and 90 \u00b0C<\/b>.<\/p>\n Utilisez un immersion blender<\/b> to mix the oil and the soda until you reach trace, a thick texture like pastry cream.<\/p>\n Transfer the paste to a slow cooker <\/b>or a heavy-bottomed pan<\/b>. Cover and cook over low heat for about 1 to 2 hours<\/b>, stirring every 15 to 20 minutes. The paste goes through different phases: pasty<\/b>, translucent <\/b>and glossy.<\/p>\n Once cooking is finished, remove from the heat and let the mixture cool slightly <\/b>. Add the essential oils<\/b>, colorants <\/b>or other additives <\/b>of your choice.<\/p>\n Pour the paste into silicone molds<\/b>, tapping lightly to remove air bubbles. Leave to rest for 12 to 24 hours.<\/p>\n Unmold the soap and let it dry in the open air<\/b> for a few days to allow excess water to evaporate. That improves the hardness of the soap.<\/p>\n The caustic soda<\/b> is corrosive. Always wear gloves<\/b>, protective goggles<\/b> and work in a well-ventilated space to avoid the risks of splashing.\u00a0<\/p>\n Also make sure the oil and soda mixtures<\/b> are at similar temperatures before combining them, to avoid unexpected reactions.<\/p>\n Finally, use utensils in stainless steel, glass or heat-resistant plastic<\/b>. Avoid aluminum, which reacts with soda.<\/p>\n Read also<\/b> : How to make neem oil soap?<\/a>\u00a0<\/p>\n Here are practical tips for a successful soap made by the hot process method:\u00a0<\/p>\n <\/p>\n <\/p>\n\n
Hot process soap making: what ingredients do you need?\u00a0<\/h2>\n
![\"Saponification](\"https:\/\/new.tchaou-group.com\/wp-content\/uploads\/2025\/06\/Saponification-a-chaud-ingredients-600x400.jpg\")
<\/p>\n\n
What are the steps of hot process soap making?<\/h2>\n
1 – Preparing the lye solution<\/h3>\n
2 – Heating the oils<\/h3>\n
3 – Mixing the lye solution and the oils<\/h3>\n
4 – Blending to trace<\/h3>\n
5 – Cooking the soap paste<\/h3>\n
6 – Adding the additives<\/h3>\n
7 – Molding<\/h3>\n
8 – Unmolding and drying<\/h3>\n
What precautions should you take when making soap by the hot process?<\/h2>\n
Tips for a successful hot process soap<\/h2>\n
\n
\n
\n
Hot process soap making: key takeaways\u00a0<\/h2>\n